Advanced Performance (APX) Sheet Label
The premier choice in label performance and merchandise protection. The Advanced Performance Xtreme (APX) Sheet Label delivers top-of-the-line performance and superior merchandise protection using proven Sensormatic technology. The APX Label provides exceptional range, sensitivity, tamper resistance, detection and consistent deactivation at the point-of-sale (POS) with virtually no nuisance alarms. This robust and stable AM EAS label operates efficiently after exposure to environmental stresses, including shipping and handling. Available for in-store hand application, this label can also be applied to merchandise at the point of manufacturing so retailers can receive floor-ready merchandise with consistent label placement-expediting receiving and selling floor fulfillment.
Retailer Values
- Utilises proven Sensormatic AM technology and manufacturing process to provide reliable detection performance
- Quality materials and precision manufacturing help deliver consistent deactivation at the POS
- Small label footprint minimises impact on brand promotion and important product information
- Robust construction provides optimal merchandise protection
- Works well on liquids, foils and in metal shopping carts
- Reactivatable for unlimited reuse
Product Codes
ZLAPXS1: White
ZLAPXS2: Mock Barcode
ZLAPXS5: Black
Technology
AM
Product Compatibility
Sensormatic AM detection and deactivation devices.
You may also be interested in the following products:
Environmental Constraints
Temperature
The maximum storage temperature should not exceed 50°C (122° F) for 96 hours at 80% RH.
Humidity
Unaffected by 80% humidity at 50°C (122°F) for up to 96 hours.
Shelf Life is two years from the date of manufacture when labels are stored between 15°C and 32°C (60°F-90°F), 30% and 80% RH.
Mode of Application
Hand
Materials of Construction
Plastic Substrate
Polystyrene/Polyethylene 0.254mm (0.010in) thick.
Magnetic Acoustic Resonator
Proprietary resonant magnetic material. Amorphous alloy based on iron, containing nickel, cobalt, boron and silicon
Laminate
Low Density Polyethylene/Polyester Polyethylene 0.101mm (0.0040in)
Bias
Proprietary semi-hard magnetic material containing iron and nickel
Adhesive
Double-coated, rubber-based adhesive:
2.4mil thick per side
Minimum peel strength of 2.27kg/5lbs
Release Liner
Double-sided, silicon-coated 80 lb. bleached Kraft liner 0.114mm
Dimensions
Colour: White, Mock Barcode, Black
Length: 45.21mm ± 0.5mm (1.78in ± 0.020in)
Width: 10.67mm ± 0.5mm (0.420in ± 0.020in)
Label Thickness
(excluding liner): Maximum 1.89mm (0.074in)
(including liner): Maximum 2.00mm (0.079in)
Labels Per Sheet: 108
